The steps to restoring power - Carolina Country

After the Storm

The steps to restoring power

After the Storm

Hurricanes and ice storms. Tornadoes and blizzards. Electric cooperative members have seen them all. And with such severe weather comes power outages. Restoring power after a major outage is a big job that involves much more than simply throwing a switch or removing a tree from a line.

The main goal is to restore power safely to the greatest number of members in the shortest time possible.

The major cause of outages is damage caused by fallen trees. That’s why your electric cooperative has an ongoing right-of-way maintenance program.

These illustrations explains how power typically is restored after a major disaster.

1 transmission

Step 1. Transmission towers and lines supply power to one or more transmission substations. These lines seldom fail, but they can be damaged by a hurricane or tornado. Tens of thousands of people could be served by one high-voltage transmission line, so if there is damage here it gets attention first.

 

2 local sub

Step 2. A co-op may have several local distribution substations, each serving thousands of consumers. When a major outage occurs, the local distribution substations are checked first. A problem here could be caused by failure in the transmission system supplying the substation. If the problem can be corrected at the substation level, power may be restored to a large number of people.

 

3 distribution lines

Step 3. Main distribution supply lines are checked next if the problem cannot be isolated at the substation. These supply lines carry electricity away from the substation to a group of consumers, such as a town or housing development. When power is restored at this stage, all consumers served by this supply line could see the lights come on, as long as there is no problem farther down the line.

 

4 tap lines

Step 4. The final supply lines, called tap lines, carry power to the utility poles or underground transformers outside houses or other buildings. Line crews fix the remaining outages based on restoring service to the greatest number of consumers.

 

5 service line

Step 5. Sometimes, damage will occur on the service line between your house and the transformer on the nearby pole. This can explain why you have no power when your neighbor does. Your co-op needs to know you have an outage here, Hurricanes and ice storms. Tornadoes and blizzards. Electric cooperative members have seen them all. so a service crew can repair it.

 

8 co op

Report your outage to the cooperative office. Employees or response services use every available phone line to receive your outage reports. Remember that a major outage can affect thousands of other members. Your cooperative appreciates your patience.

If you or a family member depend on life support, call your cooperative before an emergency arises.

 

7 other co ops

During a major outage, other cooperatives send line crews to assist with restoring power. These additional crews, as well as communications, equipment and supplies, are coordinated through the cooperatives’ statewide organization.

 

9 close up

Consumers themselves (not the co-op) are responsible for damage to the service installation on the building. Your co-op can’t fix anything beyond this point. Call a licensed electrician.

steps to restore power See all the steps to restoring power, and download the poster.

Download PDF

Leave a comment

You are commenting as guest.

Like this?

Share it with others